Hi guys, so here's the tutorial for these nails which I showed you at the beginning of January, hope it helps ! Enjoy
What you will need
Base Coat (not pictured)
Base colour - I used W7 Black
5 different colour glequins (I'm using Red, Orange, Blue, Silver and Green)
Orange wood stick to pick up your glequins (or whatever you use)
Topcoat
Base colour - I used W7 Black
5 different colour glequins (I'm using Red, Orange, Blue, Silver and Green)
Orange wood stick to pick up your glequins (or whatever you use)
Topcoat
Before I started I quickly sketched out how I wanted the shapes to fit together, if you think this will help you you can do it too, if not then just skip this step!
STEP 1 - Apply your base colour (after base coat)
STEP 2 - Apply topcoat to the area you want to stick on your glequins
It helps to have all the lids off your pots so your ready and the topcoat doesn't dry before you stick them on
STEP 3 - Onto your wet topcoat apply your glequins in the first shape
STEP 4 - Repeat step 3 again and apply the glequins in the different shapes
until your happy with how it looks
STEP 5 - Finally top coat the whole design
There you go a really simple design, just a little bit of patience is needed and that's about it !
Good luck, if you try this out don't forget to share : )
Tweet
Pin It